Shellback Tactical Banshee Active Shooter Kit with Level IV 4S17 Plates
The Shellback Tactical Banshee Rifle Active Shooter Kit with Level IV Model 4S17 Plates provides the maximum protection against level IV ballistic threats and defeats armor piercing rounds. This body armor kit includes our original Banshee Rifle plate carrier and two level IV model 4S17 armor plates. The Banshee Rifle plate carrier was the first plate carrier in our Banshee lineup and has been battle tested for over 20 years. The Banshee is low profile, lightweight and highly customizable with molle pouches. The level IV model 4S17 ballistic plates are constructed of ceramic with composite backing, NIJ 0101.06 certified and made in the USA with a ten year ballistic warranty. Stay protected against rifle threats and order your Shellback Tactical Banshee Rifle Active Shooter Kit today!
Kit Components
- Shellback Tactical Banshee Rifle Plate Carrier® x 1
- Shellback Tactical Prevail Series Model 4S17 Level IV 10 x 12 Hard Armor Plate x 2
Banshee Rifle Plate Carrier® Features
- Constructed of durable 500 Denier nylon
- Holds 10 x 12 shooter or SAPI cut ballistic plates
- Removable cummerbund with interior and exterior PALS for side plates
- Cummerbund accepts 13.75" x 5.5" soft armor inserts
- Quick release secondary securing system
- Extreme versatility with PALS webbing attachment points covering the front, back and shoulders of the vest.
- Fully adjustable and padded front, back and shoulder areas.
- Two areas of loop on front and rear for id placards
- Front pocket accepts kangaroo inserts
- Heavy Duty bar tacking at key stress points
- Wire, antenna or hydration hose guides
- Low profile design for mobility
- Rear drag handle
- Now approved with the Los Angeles Police Department (L.A.P.D.)- NTOA (NATIONAL TACTICAL OFFICER ASSOCIATION) APPROVED
- Lifetime warranty
- GSA and TAA Compliant
Level IV Model 4S17 Plate Features
- NIJ 0101.06 level IV certified - listed on NIJ Compliant Products List
- Provides level IV full edge to edge stand alone protection against armor piercing rounds
- DEA hard armor protocol compliant
- Special threat rated to stop M855 and M855A1 armor piercing rounds
- Constructed of alumina ceramic with composite backing
- 10" x 12" single curve shooters cut is considered nominal with actual measurement 9.5" x 11.5"
- Weighs 7.2 lbs and only .9" thick
- Multi-hit rated and full edge to edge protection
- Fully sealed with 1000 denier nylon cover to protect against liquids, chemicals and harsh elements
- 10 year ballistic warranty
- Made in the USA
Model 4S17 Full Specification Chart
| CATEGORY | ARMOR SPEC |
| NIJ Threat Level | Level IV |
| Certification | NIJ 0101.06 Certified |
| Special Threat | M855A1 |
| Protection Type | Stand Alone |
| Construction | Alumina ceramic & composite |
| Exterior Cover | 1000 Denier Cordura nylon |
| Size | Nominal 9.5" x 11.5" |
| Thickness | .95" |
| Weight | 7.2 lbs |
| Cut | Shooter cut |
| Curvature | Single curve |
| Spall Protection | Yes |
| Multi-Hit Protection | Yes |
| Protective Area | Edge to Edge |
| Warranty | 10 Years |
| Country of Origin | USA |
Model 4S17 Ballistic Test Data Rounds Stopped
| STANDARD | PROJECTILE | GRAIN | VELO FT/S |
| NIJ 0101.06 | .30 Cal M2 AP | 166 | 2880 |
| DEA 2017 | .223 Tact Bonded | 62 | 2600 |
| DEA 2017 | 5.56 x 45 M855 | 62 | 3100 |
| DEA 2017 | 7.62 x 39 MSC | 123 | 2400 |
| DEA 2017 | 7.62 FMJ M80 | 147 | 2750 |
| DEA 2017 | .308 Win PSPB | 150 | 2600 |
| Special | 5.56 x 45 M855A1 | 62 | 3100 |
| Special | 5.56 x 45 M193 | 55 | 3250 |
| Special | 7.62 x 39 BZ API | 122 | 2380 |
| Special | 7.62 x 51 M61AP | 150 | 2750 |
| Special | 7.62 x 54R LPS | 145 | 2880 |
LEGAL
THIS ITEM IS ITAR CONTROLLED AND CAN NOT BE EXPORTED WITHOUT APPROVAL FROM UNITED STATES STATE DEPARTMENT. BY PURCHASING THIS PRODUCT FROM SHELLBACK TACTICAL LLC, YOU AGREE TO COMPLY WITH US EXPORT CONTROL LAWS AND REGULATIONS AND TO INDEMNIFY AND HOLD HARMLESS SHELLBACK TACTICAL LLC FROM ANY AND ALL LIABILITY OR PENALTIES THAT RESULT FROM YOUR VIOLATIONS OF THOSE LAWS AND REGULATIONS.
DUE TO THE PROTECTIVE NATURE OF THIS ITEM, ALL SALES ARE FINAL.
- Armor Size:
- 10x12
- Threat Level:
- IV
- Weight:
- Standard
- Plate Cut:
- Shooter
- Plate Curve:
- Single
- Construction:
- Ceramic
- Ballistic Warranty:
- 10 year
- Certification:
- NIJ Certified
- Configuration:
- Armor Kit
- cpu-product:
- /shellback-tactical-ultimate-shoulder-pads-3-0-set-of-2/
- cpu-product:
- /shellback-tactical-hand-warmer-sac/
- cpu-product:
- /shellback-tactical-2-x-5-inch-id-placard-with-hook-back/
13 Reviews Hide Reviews Show Reviews
-
first carrier
So far, so good. Solid customization and its easy to use. It's also very comfortable. I wore it for more than a couple hours with the plates in and was surprised how comfortable it was.
-
great quality at a great price
A great carrier that distributes the weight over the whole vest and is a comfort to wear. I believe i could wear it all day and the only thing i would change is wider straps with more padding
-
First Plate Carrier
Although this is my first plate carrier, from what I can say, it seems to be comfortable to me. I am in the process of personalizing the carrier to serve my needs and priorities. I am very happy with my purchase!
-
Great kit
The plate carrier is great. Very sturdy, good material, comfortable (for the most part), and easily adjustable. The cummerbund is large so it'll fit most bodies. You can remove it and it still has straps on the sides. The shoulder straps are a little thin, more padding would make it more comfortable. As expected, the level IV plates are heavy, but still lighter than other armor I've worn. The shipping weight was 19 lbs, so you can do the math.
